Bar Bending Schedule for Neck Column | Estimation of Steel reinforcement in Neck Column

Bar Bending Schedule for Neck Column / Estimation of Steel reinforcement in Neck Column:-

Bar Bending schedule plays a very important role in estimating quantities of steel reinforcement required for the building. Before getting into Bar bending schedule for Neck Column, I refer you to learn the how to Calculate Bar Bending Schedule (basics) and how to adopt Concrete Cover for Steel reinforcement.

Neck column:

The part of the column which is present in sub structure is called neck column. (Column in substructure)

Well, the reason for this dividing column into two parts  is to make ease in understanding the Bar Bending schedule clearly.

QUANTITY OF REINFORCEMENT (STEEL) REQUIRED FOR NECK COLUMN OR Bar Bending Schedule for Neck Column :-

In this post, I am finding out the Estimation of Steel reinforcement in  Neck Column/ Bar Bending Schedule for Neck column. For this, I considered a plan as shown below.

Neck column Plan

Steps to be followed while finding out the total wt. of steel required for constructing  Neck columns: –

Neck column reinforcement  calculation is divided into two parts Main bars and stirrups.

Part-I:- Main Bars

  1. Check the Length of  Main bars
  2. Add the overlap length and bend length to the neck column.
  3. Adopt Dia of Main Bars
  4. Calculate the total length of main bar.
  5. Find the total wt of Main bars.

Part-II:- Stirrups

  1. Deduce the concrete cover from all sides of tie/stirrups and find out the length of stirrup.
  2. Adopt Dia of Stirrup.
  3. Calculate the length of stirrup including hook.
  4. Then Find out the total no. of stirrups.
  5. Find the total length of stirrups
  6. Lastly,  Calculate the total wt. of stirrups.

Length, Dia and No. of Bars are adopted and designed by the structural engineer by executing the load analysis.

To make it clear I included almost all types of columns. Well C1, C3, C4, C6,  C9 (Square Columns) are similar and C2, C8 (T-Column) C5 is Circular Column, C7 is L Type column.

You can also refer different types of columns.

Assume for calculation:-

Dia of Main Bars = 16mm,  Dia of Stirrups= 8mm, Spacing between stirrups = 0.1m.
Length of Main bar excluding extra bars is  2.25m , Diameter of Circular column C50.6

No. of Main Bars = 4 in Square column,  No. of Main Bars = 8 in Circular & L Type Column
No. of Main Bars = 10 in T Type Column

Column Details:-

C1, C3,C4, C6, C9 is Square Column (0.4mx 0.4m)
C5 Circular Column (Radius 0.3m)
C2, C8 T-Type Column
C7 L-Type Column

T-Type Column, L-Type Column

CALCULATION FOR THE QUANTITY OF NECK COLUMNS (MAIN BARS):- 

C1, C3,C4, C6, C9 is Square Column (0.4mx 0.4m):-

Bar Bending Schedule for Neck column

Bar Bending Schedule for Square Neck Column

C5 Circular Column:- 

Bar Bending Schedule for Circular Neck Column 

Well, L Type Column (C7) has same No. of Main Bars as circular column C5, total wt of steel required for L type columns are 41.78 Kgs.

C2, C8 T-Type Column:-

Bar Bending Schedule for T-Type Neck Column

Calculation table of Bar Bending Schedule for Main Bars Neck Column

CALCULATION FOR THE QUANTITY OF NECK COLUMNS (STIRRUPS):- 

C1, C3,C4, C6, C9 is Square Column (0.4mx 0.4m) 

First of all deduct the concrete cover from all the sides of column for finding out the length of stirrup.
As per the condition deduct the concrete cover of  0.05 from all sides of stirrups in square column.

Top View of Square Neck column

C5 Circular Column (Diameter 0.6m):- 

First of all deduct the concrete cover from all the sides of column for finding out the length of stirrup.
As per the condition deduct the concrete cover of  0.1 from all sides of stirrups in square column.

Top View of Circular Neck column

calculation of Bar Bending Schedule for Square type Neck column (Stirrups)

C2,C8 T-Type Column :- 

Top View of T-Type Neck column

calculation of Bar Bending Schedule for T type Neck column (Stirrups)

C7 L-Type column: – 

Top View of L-Type Neck column

calculation of Bar Bending Schedule for L type Neck column (Stirrups)

Calculation of Bar Bending Schedule for neck column stirrups

ABSTRACT FOR FINDING OUT THE TOTAL QUANTITY OF STEEL REINFORCEMENT REQUIRED FOR NECK COLUMN FOR THE ABOVE GIVEN PLAN:-

total calculation of Bar Bending Schedule for Neck column

 LIKE US ON FACEBOOK

Bar Bending Schedule for Footings 

Bar Bending Schedule for Tie Beams / Strap Beams

Don’t Forget to Share With your friends! Sharing is Caring:)

For Instant updates Join our Whatsapp Broadcast. Save our Whatsapp contact +919700078271 as Civilread and Send us a message JOIN

Never Miss an update Click on “Allow US and make us allow or Click on Red notification bell at bottom right and allow notifications.
Stay tuned! More are updated Soon!!.
Civil Read Wishes you ALL the BEST for your future..

Sending
User Review
5 (1 vote)

7 Comments

Add a Comment